5 Meter Air Rifle Target Pdf Printables

July 21st, 2020 300 FREE PDF Targets for Precision Rifle Training. AccurateShooter’s Target Page provides over 50 FREE downloadable targets.You’ll find all types of targets — sight-in targets, varmint targets, rimfire targets, bullseye targets, tactical targets, load development targets and more. Weird stuff to do with iMessage, includes a spammer - MMcintire96/imessageCounter.

  1. 5 Meter Air Rifle Target Pdf Printables 2017
  2. 10 Meter Air Rifle Target Printable
  3. 5 Meter Air Rifle Target Pdf Printables Pdf
  4. 5 Meter Air Rifle Target Pdf Printables Free

SNM's Targets
Print 'em, Stick 'em & Shoot 'em

SNM's MoA Increments Targets

25m - 200m Target:

DOWNLOAD: SNM's Metric MoA Increments.pdf

DOWNLOAD:SNM's Metric MoA Increments Thick.pdf

DOWNLOAD: SNM's Imperial MoA Increments.pdf

This target is my own creation. It is an A4 target designed for sighting in your rifle at up to 200yards (imperial version) or 200 meters (metric version).

At fixed distances, 25, 50, 100 and 200 (yard or meters) each ring / grid square is equal to a fraction of a Minute of Angle (MoA), the breakdown is as follows:

@ 25 Meters or Yards:

Red bull, distance between rings and lines = 2 MoA or 8 clicks of a 1/4 MoA rifle scope.

@ 50 Meters or Yards:

Red bull, distances between rings and lines = 1 MoA or 4 clicks of a 1/4 MoA rifle scope

@ 100 Meters or Yards:

Red bull, distances between rings and lines = 0.5 MoA or 2 clicks or a 1/4 MoA rifle scope

@200 Meters or Yards:

Red bull, distance between rings and lines = 0.25 MoA or 1 click or a 1/4 MoA rifle scope.

200m Metric MoA Target:

DOWNLOAD:A4_Metric_200m_MoA_Thick.pdf

300m - 500m Metric MoA Targets:

DOWNLOAD:A4_Metric_300m_MoA_Thick.pdf

**DOWNLOAD**:A3_Metric_400m_MoA_Thick.pdf

**DOWNLOAD**:A3_Metric_500m_MoA_Thick.pdf

** A3 TARGETS**

Want a bigger target? Email me @ snm79@internode.on.net and i'll whip one up for you.

ISSF Targets

These are A4 printable targets which I have drawn based on the International Shooting Sports Federation (ISSF) 2009 rule book. I have drawn a 10mm x 10mm square on the page to be used a print scale check. This square should measure exactly 10mm in both directions when printed.

.

DOWNLOAD:ISSF 10m Air Rifle Target.pdf

DOWNLOAD:ISSF 50m Rifle Target.pdf

SNM's Plinking Targets

Here are a couple of A4 printable targets I whipped up for plinking with my Air Rifle. They are 3inch diameter targets with 0.5' grid sizes.

DOWNLOAD:A4 4 x 3in Heavy X-Hair.pdf

DOWNLOAD:A4 4 x 3in Red Bull.pdf

  • 1General ACE Features
  • 2Client Side ACE Features
  • 3Server Side ACE Features

General ACE Features

AI Improvements

Air FCS

Currently available for AH1 Cobra and AH64 Apache (v1.04). Future integration for Russian counterparts

Differences vs vanilla system:

  • When you are in gunner position in one of the specified rotary aircraft specified above, you will no longer be able to control your weapons selection with the “F” key.
  • Instead, use your action menu to select your weapons. Select “Overlay On” to activate the MFD overlay.
  • Select “Laser On” to activate your targeting laser. When in the AGM-114 mode, you will be able to select what targeting mode the missile uses.
  • Target lock via 'next target' bind key doesn't work anymore

Usage:

  • Select weapon you want to fire via action menu (M197 Main Cannon, AGM-114 Hellfire, AGM-220 TOW)
  • Select weapon mode for AGM-114 Hellfire (if this weapon has been selected). The available modes are LOBL(default) LOAL-DIR, LOAL-LOW, LOAL-HI
  • Select overlay on (action menu) - more information will be given on top of your display
  • Select laser on (action menu) - mandatory for firing AGM-114 missiles in all the modes available
  • In case you have selected AGM-220 TOW missiles, all you'll need to do is guide the missile on target via crosshair just like you can in BMPs/Bradleys.

Notes:

  • For certain weapon modes (AGM-114 HF), such as LOAL-LOW/HI certain range and angle to target needs to be met for target impact.
  • All weapon selection will be available no matter what kind of loadout the chopper has.
  • FFAR rocket control has been moved to pilot seat. All other weapons cannot be used by anyone but the gunner.
  • Getting an AI gunner to switch weapon can be done via SPACE+F (default) key combination.
  • AGM-114 can lock on ground laser markers, or other aircraft markers, but the on board laser will take priority if it is on


Auto Rotation

Improved auto rotation over vanilla system for all rotary aircraft.

In the case of engine failure, cutting down power, bringing down speed while aligning your chopper to a 5 degrees nose up, will allow you to successfully make an emergency landing.Air Flow speed will be shown on the screen if the system notice a problem with the engine (failure, etc)

Back Blast

Most of the AT weapons available creates a large 'back blast' area behind the weapon on fire, which can cause severe burning and overpressure injuries to friendly personnel in the vicinity.

Whenever you are preparing to fire an AT shot, ensure that the backblast area of your AT weapon is clear. This typically is a 60° cone extending from the rear of the AT weapon for 30-60 meters behind the weapon.

Meter

C.Q.B. Sights

user
config

Certain optics have a CQB sight on top to give the soldier the ability to quickly target enemies at close range. ACE has this modeled in per Real Life specs

The default key combination for bringing up the CQB sight is SHIFT + F(key combination is configurable).

Crew Damage

Being in a vehicle does NOT protect you anymore from everything going around you.

You will not only suffer from bullets being shot directly at you, but also from explosive devices detonating under or next to the vehicle you are in, e.g roadside bombs or direct fire with grenades or shells.

This also includes shellshock effects for tank crews and armored vehicles.

This will allow killing/injuring crew members of certain low protected vehicles without needing to destroy the vehicle

Crew Protection

This feature simulates the protective gear of crewman and pilots (SoldierXCrew, SoldierXPilot).

The corresponding class can stand the following effects better:

  • Concussion caused by AT launcher fired
  • Concussion caused by Anti Tank Missile systems fired
  • Concussion caused by Tanks firing

This just means the effect is not that much experienced as a normal soldier would experience it. In other words the effects are weakened.

  • It doesn't protect you against all other effects like, backblast, overpressure or kicked off debris.

Usage

You can query if a unit has protective gear with this line of code:_protectiveGear=(configFile>>'CfgVehicles'>>typeOf _unit>>'ACE_CrewProtection');

Returns 1 (protected) or 0 (not protected).

Crew Served Weapons

Overview

The crew served weapons system gives players the ability to operate as a fully functioning member of a crew served weapon team. Player carry machine guns, tripods, and ammunition which they are able to deploy, mount, and load respectively anywhere on the battlefield. Most of the functions of the weapon is accessed through a unique interaction menu. At this time only machine guns are available in the crew served weapon system but others types of weapons will also come on line.

Deploying Tripods

If you have a tripod you will see a 'Deploy Tripod' option in your action menu. When selected you will see a phantom tripod directly in front of you that moves and turns as you do. When you have the exact position to place your tripod select 'Confirm Deployment' to deploy the actual tripod. If you wish to cancel select 'Cancel Deployment'.

After deploying a tripod as long as there is no machine gun mounted on it you will see a 'Pickup Tripod' option when close to the tripod. When selected you will pick the tripod up and add it to your inventory.

Mounting Machine Guns

If you have a machine gun you will see a 'Mount Machine Gun' option in your action menu. When selected if you are close enough to a compatible tripod for the machine gun (less than 2m) the machine gun will be mounted to the tripod. If you are not close enough you will receive a message telling you so.

The interact menu removes the need to use the action menu for many of the common functions involving player interaction with objects. The menu is opened with a single action menu selection that gives access to the other available options.

Loading Machine Guns

Once a machine gun is assembled ammo can be loaded/linked. If you do not already have an appropriate magazines then go to the ammo box marked ammo and take one or two. Magazines (ammo cans or drums) for crew served machine guns are large and will take up from four to six of your magazine slots each. You can usually fit two in your rucksack (except MK19 magazines which will not fit at all). To load or link a new ammo belt when near the machine gun select 'Interact With Machine Gun'. This will open the Machine Gun Crew Menu. Now click 'Load/Link' and if you have a correct magazine (must be unpacked and out of the ruck) then a new belt will be loaded or linked to the existing belt. You cannot link ammo to a belt that is more than 100% full. Drum fed machine guns can only have one belt/drum loaded at a time. You cannot load the machine gun if you are in it as the gunner. Another player must load it or you must exit first.

Unloading Machine Guns

Once a machine gun is assembled and loaded ammo can be unloaded/delinked. To unload or delink ammo belt when near the machine gun select 'Interact With Machine Gun'. This will open the Machine Gun Crew Menu. Now click 'Unload'. If there is more than one full belt loaded you will unload a 100% full belt and drop it to the ground. If there is anything left (minus some that cannot be unloaded while the gun is in service) then if you select 'Unload' again either another 100%, 75%, 50%, or 25% full belt will be unloaded until no more ammo can be removed. You cannot unload the machine gun if you are in it as the gunner. Another player must unload it or you must exit first.

Rotating Machine Guns

Once a machine gun is assembled it can be rotated left and right in 10 degree increments. To rotate the machine gun left or right when near the machine gun select 'Interact With Machine Gun'. Now click 'Rotate Left' or Rotate Right'. You will go to your knees to gain leverage and rotate the whole machine gun assembly in the appropriate direction. You can repeat this process, rotating 10 degrees at a time, until you reach the desired direction. You cannot rotate the machine gun if you or someone else is in it as gunner.

Unmounting Machine Guns

Once a machine gun is assembled the machine gun can be unmounted. To unmount the machine gun when near it select 'Interact With Machine Gun'. No click 'Unmount' The machine gun will be unmounted and added to your inventory leaving behind the assembled tripod to be picked up or awaiting a new mount. All ammo loaded in the machine gun will be automatically dropped to the ground. You cannot unmount the machine gun if you or someone else is in it as gunner.

Destruction Effects

Vehicles behave differently when they are destroyed:

  • In some cases, there's a explosion with a big fireball and lots of smoke.
  • In other cases, when no vital part of the vehicle has been hit, but enough damage has been done to render it disabled, there could be no visible effect such as explosions visible, but only the texture turning darker - black.
  • In some other instances, like when the ammo dump is hit, the explosion is much more devastating, and different visual effect have been used.
  • Additionally, vehicles don't burn in water anymore.
  • A burning vehicle can cause injuries such as burnings to bystanders


Digital Compass

Some of the newer and more modern armored vehicles in the BLUFOR and REDFOR armor class have a digital compass drawn over the normal compass.
This digital compass will give the correct bearing for all vehicle turrets, which speeds up target locating and in-vehicle communications.

Disposable Weapon System

Dogtags

5 Meter Air Rifle Target Pdf Printables 2017

Allows you to see the names of your fallen comrades.

Simply walk up a corpse and choose 'Check dogtag'.

This is the first resource in A.C.E that successfully bypasses the animation system.Instead of forcing you into a 'search' animation you are only forced to be in a kneeling position to search for the dogtag.

For Missionmakers:
The Missionmaker also has the option to enable physical dogtags. That means that whenever you check a buddy for his dogtag a real dogtag is created directly at the body, which is collectible.The dogtags could be used as a mission goal for example ('Bring back the bodies and the dogtags').
The feature of creating physical dogtags can be enabled by adding a Gamelogic on the map and setting its init line to: ACE_DogTagOn=true;

If you check a body, a dogtag is only created once. A second check, does not create a second physical dogtag.


Notes:
Dogtags are not created for civilian units, since they normally don't have dogtags. So you won't be able to check for dogtags on a dead civilian.

Eject System

Eject Option

The 'Eject' action menu option and shortcut key has been disabled for all vehicles (air, land, and sea) except the KA-50, AV8B, A10, and SU34 (these are the only default ArmA vehicles that have real-life ejection seats). Additionally, ejection seats now operate more realistically. When you eject you are propelled out of the cockpit while still in your 'seat' and then the parachute deploys. All ejection seats are also now zero, zero capable (zero altitude, zero airspeed) so you can now eject while on the ground and without moving and still safely land.

Jump Out Option

All other vehicles now have a 'Jump Out' action menu option (uses the 'eject' action key). The option simulates opening the vehicle door, hatch, or canopy and jumping out. Once you jump out you begin to free fall if you are not on the ground.

Parachute Packs

Parachute packs have been added with A.C.E. Player's can store a parachute pack in one of their binocular/goggle inventory slots. If a player has a parachute pack in his inventory after 'jumping out' of an aircraft the player will see a 'Pull Rip Cord' option in the action menu. Once selected the player's parachute will deploy. All parachute packs are single use. If you are too low to the ground when you pull the rip cord your parachute may not deploy properly which could lead to injury or death.

Engine Start

Vehicles now have a delay to start the engine, mimicking the ignition process and/or engine heating up. During the delay you can hear the engine starting.

Delays used

  • Car: 1.25 seconds
  • Motorcycle: 0.365 seconds
  • Truck or Tank: 2.25 seconds
  • M1 Abrams family of vehicles: 14 seconds


Environment FX

ACE Environment FX consists of several changes and additions to the stock environment effects in ArmA. All effects are designed to be displayed locally around the camera. All effects compensate for wind and fast movement.

Rain

The standard rain texture has been removed and replaced by particle based drops. Future version will also include long distance visibility reduction.

Fog

The standard distance based fog has been supplemented with particle based volumetric fog that is visible around the player.To disable the volumetric fog use

ACE_FX_Environment_NoFog = true;

By default it is false.

Snow

Snow can be activated setting the variable ACE_environment_snow to a value between 0,1 and 1. Values above 1 are currently possible but not recommended due to increased particle density.ACE_environment_snow = 0,1 - 1

Wind effects

(TODO) Wind effects include dust and snow being blown up due to heavy wind, creating dust-, sand or snowstorms if the wind is strong enough.

Sound effects

Replacement and enhancement of ambient sounds, including dynamic sound effects in towns, forests and other places.

Explosion Effects

Exploding ordonance have an impact on the gameplay experience.

Depending on the used ammunition and the distance between player/AI and the impact, explosions cause stun effects like ear ringing, fuzzy optics or knock outs.

Fast Switching

A.C.E speeds up some animations like:

  • Taking out/putting back the binoculars or laserdesignator
  • Switching from rifle to pistol, and vice versa, is now much faster - as in real life
  • The transition after you have thrown a grenade and switch back to rifle/pistol
  • Switching from AT launcher to rifle is faster. Also you can drop on the ground very quickly with launcher in hands in case of emergency.


Fixed-Wing Reverse

Creates an action to allow an fixed winged aircraft to move in reverse to maneuver around obstacles while stopped on the ground.There needs to be a range of condition met before action will appear:

  • airplane needs to be stopped
  • engine needs to be on
  • airplane needs to be on a plane surface (certain inclinations are still allowed)


Flashbangs

Diversionary devices — also called stun grenades or flashbangs — are a less-than-lethal device used in a wide variety of law enforcement and military operations.

Like a grenade, the device is activated by pulling a pin. When thrown, the flash-bang creates a loud sound and bright flash of light to temporarily distract or disorient an adversary.

Flash-bangs are used in law enforcement and military operations such as hostage rescue, room-clearing, crowd control and other specialized operations.

Military or law enforcement personnel will typically break down a door or smash a window of a building and toss in the diversionary device during a forced entry.


This behaviour is similar in the A.C.E MOD.

You can use flashbangs to stun and disorientate AI as well as human players.

In general the fusing time is VERY short, ~ 1.5 seconds. Make sure the flashbang is well aimed to avoid stunning yourself and your teammates.

Grenade Simulation

Grenades shot with under barrel grenade launchers, like the M203 or GP-25 behave realistically in A.C.E.

West:

Western 40mm grenades (like the M433 HEDP) have an arming delay of ~0.5 seconds, which equals a distance of ~30 meters. When the grenade has been armed after the arming delay, it will detonate on impact (true for all rounds except the Star Parachute rounds), so it is advised to engage targets that are at least 50 meters away.

Western 40mm grenades have no self-destruct, and have the possibility of becoming a dud.


East:

The Eastern 40mm VOG-25 and VOG-25P grenade for the GP-25 underbarrel grenade launcher also have an arming delay similar to the Western M433 HEDP grenade, but they also possess a self-destruct device which detonates the round after 14 seconds.The VOG-25 grenade detonates its charge on impact, while the VOG-25P (bouncing) grenade first detonates a small charge (located on the nose of the round) on impact to raise the grenade ~1 meter in the air, at which point it detonates its main charge.

Of course the Eastern grenades also have a possibility of becoming a dud.

Grenade Throw Modes

User
config

Allows you to select between 5 modes of throwing a grenade:

  • Normal throw - default speed and direction.
  • Slow throw - very useful if the enemy is just behind this 1.8 m wall or behind a corner.
  • Normal roll - grenade goes low and parallel to the ground, fast enough to bounce ('roll') 10 or so meters.
  • Slow roll - slow roll.
  • Precise throw - grenade flies directly where you're pointing at (and not ~30 degrees higher as in default amplitude throw). Allows you to throw grenades into windows etc with high precision (after some practice).

How to use: Key combination (SHIFT + H default) switches between modes. Double check what mode you're in before throwing :

HuntIR

High-altitude Unit Navigated Tactical Imaging Round

After firing the HuntIR, it propels to an average height of 500 meters (for gameplay reasons) and ejects an IR CMOS camerawhich is attached to a parachute. The camera provides 7 minutes of live video for reconnaissance which is transmitted to a handheld device (HuntIR Monitor).

You can control the camera of the HuntIR with your keyboard keys:

5 Meter Air Rifle Target Pdf Printables

ARROW KEYS - Control camera movement
W,S - Switch available HuntIR cameras
A,D - Change zoom (0x, 2x, 4x, 8x)
N - Toggle NVG
M - Toggle TI
R - Reset HuntIR camera
The HuntIR round has an average flight time of 5-10 seconds after firing before the camera is ejected and another 3 seconds before the HuntIR device is ready to transmit data.

The HuntIR round can only be fired from M203 type grenade launchers.

Mission Editors

To include the HuntIR system in your mission, the following classnames are available:

5 Meter Air Rifle Target Pdf Printables

The box: ACE_HuntIRBox

The monitor: ACE_HuntIR_monitor

The round: ACE_HuntIR_M203


Examples to add to a weapons crate:


IRStrobes

The IR Strobe allows for easy recognition and location status of friendly forces while maintaining covert operation in the field.

This is a must have accessory to assist avoiding friendly fire accidents and to support the overall safety of field personnel during night time missions.

The IR Strobe is only visible to allied personnel using night vision devices.

It permits operators using night vision goggles, scopes, binoculars and other night vision tactical devices to maintain the exact location of their team members, search dogs, vehicles and pre-positioned equipment.


Use with : Person: Object addMagazine 'ACE_IRStrobe';

Jump

Simply jump over any obstacles, like sandbags and small fences or walls.Default Key is J for jump.

LVOSS

Light Vehicle Obscuration Smoke System


The LVOSS is a self-defense smoke/obscurant device externally mounted on the host vehicle. The LVOSS is made of lightweight materials. The LVOSS has a push button Arming/Firing Unit (A/FU) which allows the operator to select the direction he needs obscured. Additionally, the LVOSS uses smoke grenades which are low in toxicity and which minimize safety hazards to personnel and the environment.

This system is available in A.C.E. on a wide range of vehicles that have been issued with such equipment, ranging from light APCs to MBTs. The smoke can be deployed from the gunner position, by firing the Given Weapon. The amount of smoke a vehicle can deploy varies depending on its type.

Magazines System

ACE Magazines System

This system is made to address some limitations in the way weapon/ammo characteristics are setup in ArmA:

  • Because muzzle velocity is specified in magazine config, weapons of the same family (using the same types of magazines) will have the same muzzle velocity/ballistics/'punch' even though 1 is a 10' barrel CQC carbine and another is a 20' barrel marksman rifle.
  • As the 'loudness' and 'visibility' of firing (for AI) is specified in ammo config, if you put a standard supersonic mag into a weapon equipped with suppressor, the AI will hear and see you just as well. It defeats the purpose of a suppressor in missions against AI and the only way to be silent to AI is to use subsonic ammo.

These two problems could be solved by specifying a custom mag for each kind of weapon, but it would either make it impossible to take a mag from a buddy with another modification of the same weapon family or, if it were decided to make all mags compatible, the whole thing would be useless as you'd still be able to use the most powerful and silent mags in whatever weapon you have. It would also create a mess in ammoboxes and soldier configs with all the different mag variants.

ace_sys_magazines is a scripted solution that automatically changes player's magazines to the ones appropriate to his weapon whenever he picks up a new mag or changes the weapon. This way, for example, AKS-74U has lower muzzle velocity than AK-74 and RPK-74 while using the same mag picked up from ammocrate. Also, if the weapon is suppressed, the standard mags are automatically changed to variants with 'suppressed' ammo. There is no need for additional magazine types in ammocrates and soldier configs as everything is converted automatically.


For Addon makers: how to set up a new weapon in a weapon family

Let's say we have a basic G36 and now want to add G36C which has a much shorter barrel and therefore lower muzzle velocity.

1. First of all, create a new mag. In ACE it looks like this:

2. Now you have to define some things in weapon config. First of all, add the new mag to mag arrays of all weapons that can use mags of this type (in our case it includes G36 and G36K).

3. Add ammoconfigname_mv=yourinitspeed. In our case it will look like this:

this entry is used by the script to find the right magazine, so initspeed here must be exactly the same as in the mag config.

4. If you're defining a new weapon family which is not currently in ACE, don't forget to add magazine type to the magazine config:

And a list of compatible mag types to weapon config:

5. Add the new mag to the magazines array of ACE_MagChecker.

Map (Inventory Object)

To Use:

First place the game logic titled Enable: Require Map Object in your mission. This will enable the feature as it is disabled by default.

The map is defined by its config as a weapon and will be stored in Bino/NVG slots. The weapon name for the object is ACE_Map

Features:When enabled this feature will require a user to have a map in their possession in order to view the map screen.Speed restraints are placed on the player and their ability to view the map screen.


Notes:

If a player does not have a map, but they are in proximity to a person who does they will find an action on the map holder. On executing this action they will be able to view the map screen as long as they stay within a few meters of the map holder.

If the player is moving at faster than a walk speed (Jogging or Sprinting) they will not be able to view the map even if they have one in their inventory. If the player is inside a vehicle the speed restraint is disabled.

Missiles

Introduction

This feature is almost entirely a 1:1 integration of the MMA v2.35 beta suite of scripts that works around the main one (mando_missile.sqf) to bring missile warfare to ArmA. The is able to launch and guide and object from the launcher or position to the target using many parameters to adjust the launch, flight and detonation characteristics of the simulated missile.

Mando Missile (ace_sys_missiles) doesnt require any extra addon to work, but you may use missile objects (or vehicles/planes/choppers) present in any existing addons as missile bodies for Mando Missiles (Missile object class name) as well as missile launchers.

Mando Missiles (ace_sys_missiles) comes also as addon, in case you dont want to use the script suite (mando_missiles folder) in your mission. Placing Mando Missile ArmA gamelogic in your mission ensures addon dependency, the gamelogic also executes mando_missileinit.sqf automatically. If you want to use the addon, but not the gamelogic, then you'll need to execute mando_missileinit.sqf from your mission init.sqf script.

Mission Writers ReadMe Source: http://www.terra.es/personal2/matias.s/mma_readme.htm

Pdf


Mando Missiles Activation

10 Meter Air Rifle Target Printable

If you are familiar with making missions with the Mando Missile System then you know you need to activate various components in the init.sqf and the description.ext files.

With ACE some of these components come automatically activated. And it is important to know which ones so you do not duplicate the code and cause errors.

So if you followed the following documentation WITHOUT considering the ACE automatically activated components you are sure to have problems. Please review the following documentation for using the Mando Missile System.
http://www.terra.es/personal2/matias.s/mma_readme.htm#t4
http://www.terra.es/personal2/matias.s/mma_readme.htm#t10

Now for ACE the following items are automatically activated when ACE is used:

  • Any lines required in the description.ext file (sounds, dialogs, resources) are already handled by ACE.
  • []execVM'mando_missilesmando_missileinit.sqf'; is already handled by ACE. Please omit this from your ACE mission.
  • [This] mando_missilesunitsmando_onlymandoones.sqf'; is already added to all vehicles. Please omit this from your ACE mission.
  • mando_missilesunitsmando_haveialaser.sqf;
  • No need to place a Mando Game Logic on your map. There is an ACE Game Logic for Mando but it is only available as one method to change the global Mando Defaults such as Minimum altitude of air targets, Minimum countermeasures extent, Maximum LOS check range (see section 1.3)


See some example ACE Mando Missions below (soon to be added)

Mando Missiles Override

Some mission writers may have old or new missions that require a different missile configuration & parameters than the ACE Mando Missile defaults. Mission writers can override these defaults by adding a GameLogic to their mission called 'Change Defaults: ACE Mando Missiles'

In the Initialization box of the 'Change Defaults: ACE Mando Missiles' GameLogic, you can set the initial value of any one of the following variables:

  • mando_minairalt = {positive #}; (Default Value: 10 meters) // Minimum altitude for Air units to be detected by radar
  • mando_minchaffdist = {positive #}; (Default Value: 5 meters) //Minimum extra distance between missile and target and missile and countermeasure.
  • mando_loscheck_range = {positive #}; (Default Value: 3000 meters) // Maximum range to perform LOS checks
  • ACE_SYS_MISSILES_MANDO_ENABLED = {true|false}; (Default Value: true)

Example:

mando_minairalt = 15; mando_minchaffdist = 8; mando_loscheck_range = 3200; ACE_SYS_MISSILES_MANDO_ENABLED = false;

If you use ACE_SYS_MISSILES_MANDO_ENABLED = false; then you are now required to replace the following Mando Missile code for each of the vehicles that ACE enables by default.

See the defaults ACE Mando Missile configuration code here:http://www.pastie.org/400347

NVG

In A.C.E mod the NVG device has two features:

  • You can enable an 'Auto Adjust Mode', which will filter out bright light sources (lit fires, streetlamps, headlights, etc) in order to prevent blindings
  • You can adjust the brightness of the NVG device manually by pressing the 'Page Up / Down' keys (default keys)


Overheating

Tracks player's weapon temperature and simulates negative effects of weapon overheating, which are:

  • Increased dispersion, loss of muzzle velocity in extreme cases.
  • Increased smoke when firing.

The first sign your weapon is a little bit too hot is increased smoke appearing along the barrel as you shoot. If you continue firing actively and not giving the weapon the time to cool down, the density of smoke will increase. If the weapon is seriously overheated, it will fire with increased dispersion. Everything goes back to normal once the weapon is cool again.Weapons with heavier barrels (machineguns) have more resistance to overheating than assault rifles and SMG's.

5 Meter Air Rifle Target Pdf Printables Pdf

Overpressure

5 meter air rifle target pdf printables 2017

Muzzleblast Effect

The muzzleblast will mainly occur when a tank fires its maingun.Debris from the ground and ejected particles from the projectile will be kicked away in the direction of travel of the projectile.
It covers an 90° arc and has a range of ~1000 meters.



Units standing in the direct LOF will either die from the overpressure caused by the shot, or become severely injured.
The killzone is 50m in direction of travel, minor effects are noticeable up to 200m.

Taking cover in a building can reduce the effects of a nearby firing tank.



Overpressure Effect

Units standing to close to a firing tank will suffer from the overpressure caused by the shot.

The overpressure effect causes:

  • Earring
  • Shock
  • Knockout and weapon loss


For a better orientation see the above picture. Maximum effect range is ~50 meters.
Everything above ~50 meters is not covered anymore by the resource (ace_sys_muzzleblast).

Different ammunition now has a different effect and range.
Depending of the muzzlevelocity and the strength of the projectile the overpressure is reduced, e.g BMP ammunition.

Parachutes

Parachutes in the A.C.E mod are steerable all the way.

Either if you have to eject from a plane, doing HALO or air deployment, you will always be able to land at your desired location, free from trees, rocks or even enemy assets.

You steer the parachute with your movement keys (W A S D) or the arrow keys:


A, D || LEFT Arrow, RIGHT Arrow : Steer left/ right

W, S || UP Arrow, DOWN Arrow : Increase/Decrease your descending rate


Note:

A high descending rate may cause injuries on landing.

You will also have the option to Cut the chute in case you land in some trees or have to get out the chute quickly.

Penetration

This system simulates penetration and behind-obstacle effects for .50 and higher AP ammo, as well as rockets and tank shells. Penetration applies only to structures (walls, buildings, trees) and avoids affecting vehicles, as true penetration of, say, an APC with injuring the crew is impossible without too many calculations.

  • Penetration depends on kind of ammo and velocity of impact. Penetration probability decreases with round velocity.
  • Rounds loose velocity after penetrating an obstacle and deflect at a random angle.
  • Secondary missiles/shrapnel effect is also simulated.
  • Rockets/HE tank shells don't penetrate structures but create a powerful secondary fragments effect behind the obstacle, making it possible to fight infantry in buildings and bunkers using AT launchers.
  • Thermobaric/Follow-through rockets are especially effective in fighting infantry covered behind/inside structures.

Limitations:

  • Penetration does not account for the material of the obstacle. It's tuned for typical urban obstacles seen in Arma, like fence walls, building walls, car wrecks, trees etc.
  • Enabled only for player-fired ammo to save on cpu power and seeing as AI does not employ methodic firing at obstacle knowing there is an enemy behind it.
  • Penetration for APFSDS (Sabot) tank rounds is disabled, as they already are excessively effective against buildings due to high Hit value. They only have a secondary missiles effect.


Radio Silence

The amount of radio chatter from AI troops may be reduced or eliminated altogether as a ACE client setting.

Range Finder

Laser Target Designators in A.C.E can be used to accurately measure the range (in meters) to a target.

It will give an elevation and azimuth reading as well as distance.

Click fire to activate the display (without firing it still functions as a laser designator)

Recoil Dust

This resource simulates dust that is kicked off when firing a high caliber weapon, e.g M107 or launcher type weapon inside a building.


The effects depend on the weather, arid (lot of dust) or humid (not much dust) zones and the terrain type.You will experience dust primarily in desert style areas.

Rocket Ballistics

This system is created to address two main problems with unguided rockets in ArmA:

  • There is no dispersion whatsoever. Every AT launcher/FFAR will hit directly where you point at, at any distance.
  • The trajectory of rockets flying faster than ~ 200-250 m/s is very flat due to the rocket not changing its pitch during the flight. It leads to incorrect sideairfriction-related calculations in the engine and as a result the rocket refuses to drop even at marginally low velocities.

Accordingly, sys_rocket_ballistics includes 2 main components:

Dispersion component

Every ammotype from RocketBase class has a value in the config, 'ACE_DISP'. The unit is the diameter of the 68% dispersion circle in mils (1/1000th of a radian or 1 meter per kilometer). For example, if an AT rocket has

It means that 68% of the rockets will land within a ten mil circle, which is 1 meter at 100 meters, 2 meters at 200 meters etc.

Trajectory component

It calculates rocket's correct vectorUp (responsible for pitch) and sets it. This way the rocket turns into the trajectory (always points where it flies to). As a result the trajectories of the rockets are very close to the real ones.

Affected weapons

FFARs and unguided AT rockets.


Notes:

Currently this feature is only enabled for human players to save some performance and not break AI aiming, as rocket trajectories drastically differ from vanilla ones. However, the scripted dispersion is applied to AI shooters too.

Round Count


sitDown

The RoundCount gives you the ability to check the remaining bullets of your currently loaded magazine.

The magazine check is bound to the 'sitDown' key (Please make sure you have bound this action to a key).Pressing the according key will execute the magazine check.

Don't worry about your avatar performing a nice sit down show, the config has been rewritten to perform a 75% faster reload animation, depending on your weapon (rifle or pistol) and your current state (standing, kneeling, prone) when you hit that key.

So you cannot sit down anymore. Keep that in mind.

It has shown to be useful to bind that key in range of your normal keys which you use during the play

A hint will pop up and show you in words the approx. amount of rounds left in your magazine (see examples below).

When you reload your magazine, the same hint will be shown. That way you will always know if you are reloading a fresh magazine or a half empty one.



ArmA Engine Limitation

- M240 issue:

a) You have shot your whole ammo (inlcuding boxes in your inventory) -> the ammo belt is removed from the machinegun

b) You pick up one new box. -> the ammo belt is shown again. BUT you have NOT reloaded yet.

= This can lead to the wrong asumption that you already 'may' have reloaded.


- M203 issue:

Since you cannot check which weapon the player has in hand, you will perform the magazine check, when you have the grenade launcher selected via firemode selector.

The magazine check won't tell you if you have a grenade in the tube or not, instead it will give you only the magazine count of the magazine you have loaded.

Rucksack System

The existing gear dialog is extended to allow users to see a list of the units rucksack contents, as well as with buttons to interact with the contents.


Pack dummy magazines (PDM) to represent stored end use magazines (EUM) in a 1:1 ratio


The unpack button removes the selected PDM and creates an EUM in inventory.

While the supply button removes the selected PDM and creates an EUM on the ground.

With the drop button you drop the selected DPM from the list to the ground, just like you drop other items.


If you select an EUM in inventory the unpack button changes to a pack button and swaps out the EUM for a PDM.

The rucksack system extends the quantity of items a unit is able to carry. It works by using pack dummy magazines (PDM) to represent stored end use magazines (EUM) in a 1:1 ratio. The existing gear dialog is extended to allow users to see a list of their PDMs and interact with them.

Rucksack System Interactions:The unpack button removes the selected PDM and creates an EUM in inventory.The supply button removes the selected PDM and creates an EUM on the ground.The drop button removes the selected DPM and creates a PDM on the ground.The pack button removes the selected EUM and creates a PDM in inventory.Double clicking on a PDM in the Ruck Items list is another way to unpack it.You can take PDMs from the Available Items list just like any other magazines.

In order to use the rucksack system a unit must have a rucksack item in their secondary weapon slot. If you select an EUM in inventory the unpack button changes to a pack button and the supply button is disabled. If you select an PDM from Ruck Items, the pack button changes to an unpack button and the supply button is enabled. If there is not room in inventory to unpack a PDM the unpack button will be disabled.

Clicking on the pack button when you have some partially used magazines of the selected type may result in some or all of those magazines being removed and added back to the end of your other magazines list after a short delay. If all magazines of the selected type in inventory are partially used, the pack button will still be enabled. However, if you click it in this situation it should only shuffle your magazine order, disable itself from further clicking, and not actually pack any magazines.

If there is no PDM defined for the selected EUM, the pack button will be disabled. There should be PDMs defined for all the default ArmA magazines, and all ACE magazines. Magazines defined in other addons will need to define their own PDMs, if they want their magazines to work with this ruck system.

How To Define New Magazine for ACE:1. Define a new class that inherits from ACE_PackDummyMag, define the ACE_EndUseMag value as the name of the EUM this PDM should unpack to. Also define the ACE_Size value as the number of cubic centimeters this item takes inside the rucksack.2. Define ACE_PackDummyMag on the EUM as the name of the PDM you just created.3. Add the PDM from step 1 to the magazines array of ACE_Rucksack, if you don't the PDM won't be dropped when the rucksack is dropped.4. Add the EUM from step 2 to the magazines array of ACE_MagChecker, if you don't you won't be able to pack this magazine if there are any partially used magazines of this type in inventory.


Update to ruck system (Jan 31 2009)

In view of the strain put by the amount of real magazines per unit on the network engine, ruck system has been revised. The main change is that _PDM magazines are now stored in a unit variable, instead of being 'physical' magazines. The variable is called ACE_Ruckmagazines, it contains a list of a unit's ruck magazines in this format:

Consequently, the operations with ruck magazines can no longer be done using native functions 'addmagazine', 'removemagazine' and 'magazines'. There are three new functions created to do just that:

Will add 4 pistol mags to _unit. You can also use

Which will only add 1 mag.

To remove a mag:

To get a list of ruck mags:

the list will be a standard plain array just like what 'magazines' command returns.

Of course, you can also directly manipulate the variable by 'setvariable' command.

Note that you still have to use _PDM magazine names.

Functionality changes and limitations

As ruck magazines are now 'phantom' and exist only on the client machine, there are several changes and inherent limitations as to how the system performs, both in SP and MP:

  • Dropping the ruck will result in magazines being unpacked into player's inventory and (when there is no more space there) on the ground.
  • Dropping a ruck item on the ground will create an unpacked mag on the ground (not a _PDM as before).
  • In multiplayer, you can't access unconscious player's rucksack contents.
  • A special script is spawning ruck contents of a dead unit so that all clients can access them. This feature can be turned off (to prevent the clogging of the battlefield in persistent/long-lasting PvP missions, as spawned weaponholders are not removed by body removal scripts) by setting the variable ACE_Sys_Ruck_SpawnRuckItemsOnDeath to false.


Weapons on Back

Ace allows soldiers to carry weapons on their backs- in addition to rucksacks. For example, you could carry a sniper rifle, with an MP5 on your back. A common use for this is allowing soldiers to carry an AT launcher and a rucksack, as well as their primary weapon.This feature can be disabled, or set to secondary weapons only (AT launchers and rucks) by mission editors.

To add a weapon to a units back :

This will add an M72 Law launcher to _unit's back. Ammunition is added in the normal way and takes up the same slots.

To find the weapon on a units back :

_weapon = _unit getvariable 'ACE_weapononback';

This will return the weapon class name.

Sandbags

Allows you to deploy sandbags in order to build up static defense positions.You can also stack up sandbags by using the ARROW UP/DOWN keys or remove built sandbags and put them back into your inventory.

This feature does not use an animation to indicate you the building process, but uses a progress bar.That way you can always interrupt the deployment if something unforseen happens. With an animation you would have been trapped.It is necessary that you stand still and don't move around or the build process gets aborted.You are also able to build sandbags while prone or kneeling, but in these stances it takes more time.

The sandbags should be capable of withstanding ~200 5.56 rounds before they are perforated and the sand rinses out.

Sights Adjustment

A number of weapon systems in ACE allow you to adjust the sights for range and windage:

  • Sniper/marksman rifles
  • AT launchers
  • Underbarrel grenadelaunchers
  • Vehicle and tripod mounted MGs and GLs

The implementation of sight adjustment is a bit different between these categories to allow for the most fluent and easiest use possible.

Sniper rifles:

The adjustment dialog can be brought up by pressing a key combination (default Shift-V). Then click on corresponding arrows to adjust elevation and windage.

AT launchers:

Default keys: Arrow Up and Arrow Down. Use them when you got the launcher in hands to increase/decrease elevation.

Vehicle/tripod systems:

There are one or two actions that appear in the menu when you occupy gunner seat in a vehicle which has this system enabled. 'Sight adjustment' action brings up a dialog where you can adjust the sight. One more action appears for GL's - 'Use T-E'. T-E stands for traverse and elevation mechanism, which is a thing used for indirect firing. In this mode information about current barrel elevation and azimuth appears on the screen, which allows to fire from defilade positions using a spotter, for example. In this mode you can also access a range table for the weapon, where you can look up necessary elevation for different ranges. When you activate T&E mode, the adjustments you made in the dialog stop affecting your projectiles, to avoid confusion.

Underbarrel grenadelaunchers

A key combination (shift-v default) brings up a small info display which lets you see in real time an approximate distance grenade will fly with current weapon elevation. The text becomes red when elevation corresponds exactly to the shown range (on flat surface). Indirect (hi arc) mode is also supported. Press the combination again to switch the display off. Firing anything other than GL or changing your primary weapon also turns it off.

Smoke Grenades

In A.C.E mod, smokegrenades are just normal smokegrenades you all know from the game.

But in A.C.E they have a special feature: They can block the view of the AI, not only humans

This counts for all smoke producing devices you can use in A.C.E, no matter if those are hand smoke grenades, m203 type, or vehicle ones

Stamina

In A.C.E you are not longer able to run forever.

Depending on your movement speed, like running, sprinting or walking slowly you are becoming tired. Rolling over while in prone position does also count against your stamina level

Different classes have different stamina levels: Engineers, as well as Special Forces units, have increased stamina, while medics, crew members etc have lower than a normal grunt.

Together with the items you carry in your gear or in your rucksack, your stamina is changing - depending of the weight of the whole gear.

Additionally other influences like weather, wounding, suppressive fire your stamina can change.

Once you have reached your stamina level you collapse. This is most likely the case when carrying a M240 with lots of ammoboxes and any launcher type weapon at the same time, e.g when you overload yourself.

Current stamina level is indicated with heartbeat, breathing and in the worst case with a collapse and blackout.

In order to regain your stamina, you should be 'catching your breath'. This can be done by standing still. The position also counts a bit: prone > crouch > standing.

Steady Aim

A.C.E improves the aim when you are walking or crouching slowly with your rifle leveled.

Compared to the default animation, the new aim is much better to use, especially when in ironsight mode.

Also, because of the increased sway compared to vanilla ArmA, the hold breath feature now stands a purpose, since will steady your aim for that fraction of second needed for a precise shot.

Suppression


Tailrotor

Tailrotors from helicopters are as deadly as in reality in the A.C.E mod.

Depending on the physical orientation of a tailrotor, it will kill you when you run into it, while boarding a helicopter.This makes proper boarding procedures and boarding safety necessary.

Tracking

Special group tracking markers may be enabled on ACE clients as a configuration option.

Voices Russian

You may make radio voices speak Russian permanently on ACE clients as a configuration option.

Weapon Jamming

user
config

Player's primary weapon can jam randomly. Once you're jammed, you can press the 'R' key (can be changed in ACE_keys.hpp) for immediate action. There will also appear a user action called 'Unjam' which will do the same.

With a certain probability the jam will be too serious to be fixed with immediate action, and you will be required to reload the weapon to fix it.


Weapon Resting

This system allows you to 'rest' your primary weapon against horizontal or vertical edges of objects of suitable height (like vehicles, fences, buildings, trees) when you are keeled or standing.

When the weapon is deployed, you get a lower recoil and weapon sway. The weapon also becomes harder to turn, and if you turn it more than 15 degrees to either side from the initial direction, it'll automatically undeploy itself.

To undeploy the weapon you just need to press a movement key or change stance.
To deploy your weapon, press Shift+Space (which is the default key combination defined in the ace_keys.hpp file)

Weapon Bipods

This system is similar to the Weapon Resting but it is available only from prone position, and only for weapons that have modeled bipods. This will increase even further the stability of the weapon (reduced recoil and weapon sway) but will also limit the horizontal and vertical speed more than weapon resting.To undeploy the weapon bipods you just need to press a movement key or change stance.
The keys used to deploy your weapon bipods are the same as the Weapon Resting ones, and cannot be assigned separately

Wind Effect on Helicopters

Usage:First place the game logic titled Enable: Wind Impact on Helicopters in your mission. This will enable the feature as it is disabled by default.Next place any helicopter class vehicle in the mission.

Optionally:Set a value to the variable ACE_Wind_Modifier_Vehicles in your mission. If no value is set it will default to 0.5. The greater this value the bigger impact the wind will have on helicopters and decreasing the value will cause it to have less of an effect.

Features:When enabled the wind created by the ArmA engine will have an effect on helicopters.

Notes:The wind speeds in ArmA are very dependent on the weather.

If you have any issues in using it see the mission TestE_Wind_Vehicles.Sara in the editor missions folder of the ACE release.

Wounding System

The wounding system encompasses stun effects, pain, unconsciousness, bleeding, cardiac arrest (heart failure), body dragging, as well as the new medical system, which includes medical appliances to treat the various health effects. The system also contains some behavior and reaction modifiers for the AI.

Stunning

Stunning generally occurs when a soldier is hit by a bullet or takes damage some other way, such as falling or getting hit by a fast moving vehicle. The soldier will fall to the ground and be unable to fight for a few seconds.

Bleeding

When a soldier takes a significant amount of damage, he may start to bleed. Bleeding persistently causes damage until stopped by a bandage or, in serious cases, a tourniquet. Moving around will increase blood loss.

A pulsating red edge around the screen indicates if the player is bleeding.

Pain & Unconsciousness

Pain is increased in mostly the same ways as blood loss, but is treated seperately and will reduce over time if the soldier lays still. If a soldier takes so much damage, that his pain is higher than his tolerance threshold, he will pass out and remain unconscious until he is either treated with morphine, or his pain subsides enough. While unconscious, a soldier can no longer do the following:

  • Move, shoot etc.
  • Give orders to AI

Furthermore, his hearing and visibility are reduced depending on his level of consciousness. Soldiers close to regaining consciousness will be able to perceive their surroundings better than soldiers who are close to death.

Cardiac Arrest

When a soldier has lost a significant amount of blood, he may experience cardiac arrest, meaning his heart will stop beating. If this happens, he will die, unless he recieves epinephrine.

Examination & Treatment

If you are close enough to another soldier, you can examine them from the action menu. You will get a quick summary of their general status and wounds (are they bleeding, unconscious, in pain, no pulse). If you have the necessary medical supplies, relevant treatment options will then be added to your action menu.

Medical Items

  • Bandages - used to stop the bleeding. This is the first step to be taken in order to stabilize the victim
  • Morphine - used to relieve the pain of the victim. Will stop the screaming. It should be used after the victim has been stabilized
  • Epinephrine - used to restart the heart and get the blood going again due to the hormone boosts the supply of oxygen and glucose to the brain and muscles. to be used if the victim is in cardiac arrest. To be used as a last resort.
  • Large Bandage - WIP
  • Tourniquet - WIP
  • Splint - WIP
  • Plasma Bag - WIP
  • IV Bag - WIP

5 Meter Air Rifle Target Pdf Printables Free

Medical PersonnelWhile every soldier is able to help out his fellow buddy who has been injured in combat, his effectiveness is not going to be the same as a qualified field medic/corpsman. It is recommended that, if available, medics should provide the CPR.

Client Side ACE Features

3rd Person View

You can alter slightly how the 3rd-person view is presented. See the ..ArmAdtaaceace_clientside.hpp file and set just one of the ACE_3RDVIEW defines.

BIS Class Hiding

This entry will hide BIS original units from selection in the editor. It is intended to reduce clutter in the unit selection, and to encourage the use of ACE-Mod units, therefore taking advantage of their extra abilities. Please note, this will not remove original BIS units from the game, so any missions that rely on them will load correctly.

#define ACE_SCOPE_SHOW_BIS __hidden

Replace __hidden with __visible to show original units - Note the use of double underline character.

BIS Groups Hiding

This setting controls the visibility of original BIS groups in the editor. It has a similar function to BIS Class Hiding. The groups are hidden by default and can be shown by uncommenting or adding the entry;

#define ACE_SCOPE_SHOW_BIS_GROUPS

This setting is not inserted prior to version 1.07 so therefore must be added to take effect. Remove the // characters to uncomment.

BIS Sounds Override

To restore BIS default sounds or use enable use of another sound mod comment out the define for ACE_OVERRIDE_BIS_SOUNDS in the ..ArmAdtaaceace_clientside.hpp file.

Cartridges

Adjustments to how ejected cartridges are displayed may be made in the ..ArmAdtaaceace_clientside.hpp file and alteringthe ACE_FX_CARTRIDGES_E class contents.

Keys

Adjustable bindings are in the ..ArmAdtaaceace_keys.hpp file.

  • afterburner - left-shift
  • adjust rifle sights - shift-v
  • adjust gl sights - shift-v
  • jump low fence - j
  • NVG brightness up - PageUp
  • NVG brightness down - PageDown
  • CQB sights - shift-F (currently hardcoded)
  • adjust grenade throw - shift-H
  • clear weapons jam - r
  • rest weapon/deploy bipod - shift-space

Other key binds include

  • check ammo - '
  • open parachute -

OFPEC ILS

Adjustments to the Instrument Landing System aids for jets and helicopters may be made in the ..ArmAdtaaceace_clientside.hpp file and alteringthe OFPEC_ILS_CONFIG class contents.

Radio Commands

Radio chatter from the AI may be reduced or eliminated. See the ..ArmAdtaaceace_clientside.hpp file and set just one of the ACE_RADIO defines.

Russian Voices

You may make radio voices permanently speak Russian by default. See the ..ArmAdtaaceace_clientside.hpp file and uncomment the define for ACE_RUSSIAN_VOICES_ACTIVE.

Sight Adjustment Method

Whether you want range values displayed for scopes with bullet drop compensation look in the ..ArmAdtaaceace_clientside.hpp file and alterthe ACE_SIGHT_ADJUSTMENT_RIFLE_CONFIG class contents.

Tracers SP

Tracers may be disabled in SP mode. See the ..ArmAdtaaceACE_Tracers.hpp file.

Tracking

Special group tracking markers may be enabled. See the ..ArmAdtaaceACE_Tracking.hpp file.

Server Side ACE Features

Settings for dedicated server features may be adjusted in the ..ArmAdtaaceACE_serverconfig.hpp file

Check PBOs

To check if certain pbo's are missing on client and prevent client from playing if they are missing.check_pbos = 1;

Check All ACE PBOs

To verify that all pbos shipped with ACE are running on client.check_all_ace_pbos = 1;

Checklist

If check_all_ace_pbos is enabled, the following pbos are added to the checklist. If not, only these pbos are checked.checklist[] = {'ace_addon1','ace_addon2'};

Exclude PBOs

If all ace_pbos_check is enabled, exclude the following files from check.exclude_pbos[] = {};

Retrieved from 'https://community.bistudio.com/wiki?title=ACE_Features&oldid=245349'